Repair BIG Final Drive Hub for CAT D10 Dozer | Machining & Drilling

In this video we need to repair a big final drive hub for a Caterpillar D10T Bulldozer. The duo cone seal area of the hub is worn out and needs to be modified and upgraded to suit a new duo cone seal ring (labyrinth seal). There are also two bolt holes in the flange that are damaged and need repair. So there is plenty of machining and drilling & tapping to get this job done. First we set it up in our LZMT lathe using a 950mm face plate and 6MT heavy duty live centre before machining to spec. After the machining is complete we use our radial arm drill for drilling the bolt holes to suit the new duo cone ring. We then finish off the job by repairing the two bolt holes in the hub. First we bore out the holes with an annular cutter, then machine up sleeves and interference fit using a pull bolt system. We hope you enjoy this video from our machining workshop!

In this video we are using:
- LZMT CW6280D Lathe
- Hafco ZX3050X16 Radial Arm Drill
- Hafco TM-1740G Lathe

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe

To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/

Official CEE Merch shop: https://www.ceeshop.com.au

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

Music: https://www.epidemicsound.com/referral/rccrvr/
Song: Some kind of animal by Tigerblood Jewel

#australianmachinist #machineshop #machinist